Development and validation of a liquid chromatography–tandem mass spectrometry method for the simultaneous analysis of androgens,estrogens, glucocorticoids and progestagens in human serum

We present a liquid chromatography tandem mass spectrometry method for the simultaneous analysis of 16 endogenous steroids (androgens, estrogens, glucocorticoids and progestogens) in human serum. Samples (250 μl of matrix) were extracted with t-butylmethyl ether prior to LC–MS/MS analysis. The chromatographic separation was achieved on a reversed-phase column using a methanol–water gradient. The HPLC was coupled to a triple quadrupole mass spectrometer equipped with an electrospray ionization source with acquisition in multiple reaction monitoring mode. The method was validated using surrogate matrices and human serum samples. The specificity of the method was confirmed for all of the considered steroids; linearity was also assessed (R² > 0.99, lack-of-fit test) in the ranges of concentrations investigated. The lower limits of quantification were in the range 10–400 pg/ml depending on the target steroid. Accuracy was in the range 85–115% for all target steroids except for the lower limit of quantitation levels where it was 80–120%. The extraction recovery was always >65%. No significant matrix effects were observed. To test the reliability of the method, the analysis of serum samples collected from 10 healthy subjects (5 M/5F) was performed. The present method can be used to identify the trajectories of deviation from the concentration normality ranges applied to disorders of the gonadal and adrenal axes.     

Microfluidic device integrating single-cell extraction and electrical lysis for mass spectrometry detection of intracellular compounds

Analysis of cellular composition and metabolism at a single-cell resolution allows gaining more information about complex relationships of cells within tissues or whole living organisms by resolving the variance stemming from the cellular heterogeneity. Mass spectrometry (MS) is a perfect analytical tool satisfying the demanding requirements of detecting and identifying compounds present in such ultralow-volume samples of high chemical complexity. However, the method of sampling and sample ionization is crucial in obtaining relevant information. In this work, we present a microfluidic sampling platform that integrates single-cell extraction from MS-incompatible media with electrical cell lysis and nanoESI-MS analysis of human erythrocytes. Hemoglobin alpha and beta chains (300 amol/cell) were successfully identified in mass spectra of single-erythrocyte lysates.     

Hair analysis as a new tool to monitor adherence to long-term therapy to statins

Statins are cholesterol-lowering medications which are widely prescribed as first-line treatment for hyperlipidemia, against high blood cholesterol aimed at reducing the risk of atherosclerotic diseases. Notwithstanding their undoubted efficacy, the needed long-term treatment with these drugs is characterized by a high percentage of dropout. Consequently, an effective tool to verify the patients’ compliance to statin therapy is needed. In this context, the analysis for drugs and drug metabolites in the hair may represent an almost ideal tool because, according to a sound body of forensic toxicological literature, concentrations in the hair matrix reflect the chronic intake of drugs and pharmaceuticals. In this light, in the present study, a novel, specific and sensitive ultra-performance liquid chromatography–tandem mass spectrometry method has been developed to determine six statins and their metabolites (namely atorvastatin, (p)α-OH-atorvastatin-lactone, (o)α-OH-atorvastatin-lactone, rosuvastatin, N-desmethyl rosuvastatin and pravastatin) in human hair. After optimization, the method was successfully validated in terms of selectivity, linearity, sensitivity, precision, accuracy, stability and matrix effect. Moreover, the practical applicability of this method for verifying adherence to statin therapy was assessed by testing samples of hair collected from subjects under long-term therapy with statins.     

Soret and Dufour aspect of viscoelastic fluid due to moving cylinder with viscous dissipation and convective boundary conditions

Owing to contribution of thermo-diffusion phenomenon in various engineering and industrial frame works, scientists have presented some exclusive investigations on this topic. In current research, the thermos-diffusion prospective of second grade material accounted by a moving cylinder have been predicted. The applications of Soret and Dufour effects based on the thermos-diffusion phenomenon is evaluated. The magnetic force and viscous dissipation effects are presented for the current flow model. Additionally, the improvement in thermal transport of viscoelastic fluid is suggested with radiative phenomenon. The convective boundary constraints are used to report the thermos-diffusion phenomenon. The system based on dimensionless form is obtained with interaction of new variables. The shooting technique is used for numerical observations by using MATLAB software. The physical impact of phenomenon in view of parameters is graphically attributed. It has been noted that increasing velocity profile is results due to curvature parameter and viscoelastic parameter. The enhancement in thermal profile is noted due to Dufour number and Eckert number.     

Determination of lanthanum and cerium in cmsx-4 nickel-based superalloys by inductively coupled plasma mass spectrometryEI北大核心CSCD

CMSX-4 is the second-generation nickel-based single crystal superalloy used widely in the world. The oxidation resistance and corrosion resistance of CMSX-4 alloy can be improved by adding trace lanthanum (La), cerium (Ce) and other rare earth elements. A method for the simultaneous determination of La and Ce in CMSX-4 nickel-based superalloy by wet dissolution-inductively coupled plasma mass spectrometry was established. The sample was heated and dissolved under normal pressure by aqua regia and hydrofluoric acid, and the interference of fluorine ion was eliminated by using perchloric acid. The amount of dissolved acid and the digestion conditions were optimized. The limits of detection were 0.23 μg/g for La and 0.85 μg/g for Ce under optimized conditions. The spiked recoveries were 95.0%–98.9% with the relative standard deviations of 1.3%–3.9%, which can meet the requirements of accurate and rapid determination of La and Ce in CMSX-4 nickel-based superalloy. © 2023, Youke Publishing Co.,Ltd. All rights reserved.     

SMART: A data reporting standard for mass spectrometry imaging By Ying Xi,Alexandria L. Sohn,Alena N. Joignant,Stephanie M. Cologna,Boone M. Prentice and David C. Muddiman

Mass spectrometry imaging (MSI) is an important analytical technique that simultaneously reports the spatial location and abundance of detected ions in biological, chemical, clinical, and pharmaceutical studies. As MSI grows in popularity, it has become evident that data reporting varies among different research groups and between techniques. The lack of consistency in data reporting inherently creates additional challenges in comparing intra- and inter-laboratory MSI data. In this tutorial, we propose a unified data reporting system, SMART, based on the common features shared between techniques. While there are limitations to any reporting system, SMART was decided upon after significant discussion to more easily understand and benchmark MSI data. SMART is not intended to be comprehensive but rather capture essential baseline information for a given MSI study; this could be within a study (e.g., effect of spot size on the measured ion signals) or between two studies (e.g., different MSI platform technologies applied to the same tissue type). This tutorial does not attempt to address the confidence with which annotations are made nor does it deny the importance of other parameters that are not included in the current SMART format. Ultimately, the goal of this tutorial is to discuss the necessity of establishing a uniform reporting system to communicate MSI data in publications and presentations in a simple format to readily interpret the parameters and baseline outcomes of the data.     

A lubricated stagnation point flow of nanofluid with heat and mass transfer phenomenon: Significance to hydraulic systems

The improved thermal association of heat transfer is considerably observed due to interaction of nanoparticles in recent days. The lubrication phenomenon with heat and mass transfer effects plays a key role in the hydraulic systems. In current research, the thermal impact of nanofluid over a lubricated stretching surfaces near a stagnation point analytical has been studied. A thin layer of lubricating fluid with a variable thickness provides lubrication. The inspection of thermophoresis and Brownian motion phenomenon is illustrated via Boungrino model. The analytical finding of refurbished boundary layer ordinary differential equations is obtained by a reliable and proficient technique namely variational iteration method (VIM). The Lagrange Multiplier is a potent tool in proposed technique to reduce the computational work. In addition, a numerical comparison is presented to show the effectiveness of this study. The range of flow parameters is based on theoretical flow assumptions. Physical inspection of involved parameters on velocities, temperatures, concentrations, and other quantities of interest when lubrication is presented. The current results present applications in polymer process, manufacturing systems, heat transfer and hydraulic systems.     

Effect of synthesis parameters on the structural,morphological characteristics,and photocatalytic activity of La2O3 nanoparticles

This study investigates the influence of synthesis processes such as sonication, sol-gel, and microwave on the production of highly crystalline Lanthanum oxide nanoparticles (La₂O₃) employing Lanthanum nitrate and Ammonium hydroxide (NH₄OH) as precursors. X-ray diffraction (XRD), particle size analysis (DLS), Field emission scanning electron microscopy (FESEM), Fourier-transform infrared spectroscopy (FTIR), ultraviolet–visible absorption spectroscopy (UV–Vis), and electrochemical impedance spectroscopy (EIS) were used to examine the most effective processing method and its effects on the nanoparticle characteristics, such as structure, morphology, and optical and electrical behavior. Sonication produces La₂O₃ NPs with a smaller crystalline size, an agglomerated nanorod structure, a higher bandgap, and better electrical responsiveness than sol-gel and microwave techniques. Structural and optical characterization tests discovered this. The photocatalytic degradation activity of cationic Safranin and anionic Congo red dye exhibits degradation efficiency of around 90.13% and 89.66%, respectively.     

High Valent Mercury Fluoride Ions

Mercury fluoride ions formed during the laser ablation of HgF_{2( s )} show the formation of six different cluster ion series viz., HgF_n^±, Hg_nF_n–2^±, Hg_nF_n–1^±, (HgF)_n^±, Hg_nF_n+1^±, and Hg_nF_n+2^±. Among the different ion series, the observation of high valent HgF_n^±_(n^±_{=3,4; n}⁻_=6–8) indicates the existence of corresponding molecules which signify the remarkable participation of 5d Hg electrons in the chemical bonding with F atoms and thus make Hg a truly transition metal. Further, molecular orbital calculations show a large HOMO-LUMO energy gap (≥3 eV) and high electron affinity (≥5 eV) that indicates highly stable HgF_n=3,4,6,8 with super halogen properties.     

Dilute-and-shoot approach for determination of several biomarkers and pharmaceuticals in wastewater using nanoflow liquid chromatography – Orbitrap mass spectrometry

A new method for quantitative analysis of several biomarkers and pharmaceutical compounds in wastewater has been developed employing nanoflow liquid chromatography with Orbitrap mass spectrometry. An easy dilute-and-shoot approach has been used for sample preparation with a dilution factor of 5. Improved retention of ionic and highly polar compounds has been achieved by the addition of tetrabutylammonium bromide as an ion pair reagent into the final diluted sample. The new nanoflow liquid chromatography method has demonstrated low matrix effects (70%–111%), high sensitivity in terms of limits of quantification (0.005 to 0.3 μg/L), low injection volume (70 nl) and solvent consumption, and the ability to analyze diverse polar and ionic analytes within one run using a single reversed-phase nanoflow liquid chromatography column. Wastewater samples (n = 116) from the wastewater treatment plants of different cities in Latvia were analyzed using the developed method. The observed concentrations of biomarkers were in line with the literature data.